Person
Dr.-Ing.Carlo Guarnieri Calò Carducci
Address
Carlo Guarnieri Calò Carducci was born in Bari (Italy) in 1983. He received the M.Sc. degree (summa cum laude) in electronics engineering from the Polytechnic of Bari, Bari, Italy, in 2013 and the Ph.D. degree (summa cum laude) in 2017 at the Department of Electrical and Information Engineering.
In 2017 he joined the Institute for Automation of Complex Power Systems (ACS), E.ON Energy Research Center, RWTH Aachen University, Germany, where he worked as postdoctoral research associate in the Distribution Grid Monitoring and Automation team. He is member of the IEEE Instrumentation and Measurement Society.
Publications
Guarnieri Calò Carducci, Carlo; Pau, Marco; Cazal, César; Ponci, Ferdinanda; Monti, Antonello; "SMU Open-Source Platform for Synchronized Measurements"; Sensors, 22, 5074 |
Schraven, Markus Hans; Droste, Kai Andreas; Guarnieri Calò Carducci, Carlo; Müller, Dirk; Monti, Antonello; "Open-Source Internet of Things Gateways for Building Automation Applications"; Journal of Sensor and Actuator Networks, 11, 74 |
Guarnieri Caló Carducci, Carlo; Pau, Marco; Ponci, Ferdinanda; Monti, Antonello; "Towards the virtualization of measurements : architecture, solutions and challenges"; 11th IEEE International Workshop on Applied Measurements for Power Systems : September 29-October 1, 2021, virtual workshop : 2021 workshop proceedings / 2021 AMPS ; sponsors and organizers: IEEE, IEEE Instrumentation & Measurement Society, 6 Seiten |
Guarnieri Caló Carducci, Carlo; Spadavecchia, Maurizio; Attivissimo, Filippo; "High accuracy testbed for thermoelectric module characterization"; Energy conversion and management, 223, 113325 |
Baranski, Marc; Storek, Thomas; Kümpel, Alexander; Blechmann, Sebastian; Streblow, Rita; Müller, Dirk; Gross, Stephan; Guarnieri Caló Carducci, Carlo; Haghgoo, Maliheh; Sowa, Igor Piotr; Monti, Antonello; Knorr, Martin; Wiemann, Stephan; Haupt, Lars; Seifert, Joachim; Sychev, Ilya; Fitzek, Frank; Krahmer, Sebastian; Gasch, Etienne; Schegner, Peter; Farac, Robert; Williams, Fiona; "National 5G Energy Hub : Application of the Open-Source Cloud Platform FIWARE for Future Energy Management Systems" |
Deb, Paromita; Düber, Stephan; Guarnieri Caló Carducci, Carlo; Clauser, Christoph; "Laboratory-scale hydraulic fracturing dataset for benchmarking of enhanced geothermal system simulation tools"; Scientific data, 7, 220 |
Guarnieri Caló Carducci, Carlo; Lipari, Gianluca; Giaquinto, Nicola; Ponci, Ferdinanda; Monti, Antonello; "Error Model in Single Board Computer based Phasor Measurement Units"; IEEE transactions on instrumentation and measurement : IM, 69, 6155-6164 |
Guarnieri Caló Carducci, Carlo; Ponci, Ferdinanda; Monti, Antonello; "Experimenting Non-Contact Power Measurement for 3-Phase Residential Applications"; The lords of the IMS: expanding the frontiers of metrology innovations : I2MTC : 2019 IEEE International Instrumentation & Measurement Technology Conference : Grand Millenium Auckland, Auckland, New Zealand, May 20-23, 2019 : 2019 conference proceedings / sponsors and organizers: IEEE, IEEE Instrumentation & Measurement Society, 6 Seiten |
Guarnieri Caló Carducci, Carlo; Lipari, Gianluca; Bosbach, Nils; Di Raimondo, Tommaso; Ponci, Ferdinanda; Monti, Antonello; "A Versatile Low-Cost OS-based Phasor Measurement Unit"; The lords of the IMS: expanding the frontiers of metrology innovations : I2MTC : 2019 IEEE International Instrumentation & Measurement Technology Conference : Grand Millenium Auckland, Auckland, New Zealand, May 20-23, 2019 : 2019 conference proceedings / sponsors and organizers: IEEE, IEEE Instrumentation & Measurement Society, 6 Seiten |
Guarnieri Caló Carducci, Carlo; Monti, Antonello; Schraven, Markus Hans; Schumacher, Markus; Müller, Dirk; "Enabling ESP32-based IoT Applications in Building Automation Systems"; 2019 IEEE International Workshop on Metrology for Industry 4.0 and Internet of Things : Naples, Italy, June 4-6, 2019 : proceedings / MetroInd4.0 & IoT ; IEEE |
Guarnieri Caló Carducci, Carlo; Di Nisio, Attilio; Attivissimo, Filippo; Trotta, Amerigo; "Dynamic Error Correction for Magnetic Property Measurement"; IEEE transactions on instrumentation and measurement : IM, 69, 836-844 |
D’Aucelli, G. M.; Giaquinto, N.; Guarnieri Caló Carducci, Carlo; Spadavecchia, M.; Trotta, A.; "Uncertainty evaluation of the Unified Method for thermo-electric module characterization"; Measurement : journal of the International Measurement Confederation (IMEKO), 131, 751-763 |